AMERICA ARCHERY CULTURE

WORLD TRADITIONAL ARCHERY ORGANIZATION

The Origin of Bow and Arrow

America Bow Origin

American Indians did not always have the bow and arrow. It was not until about A.D. 500 that the bow and arrow was adopted in Iowa some 11,500 years after the first people came to the region. Primary benefits of the bow and arrow over the spear are more rapid missile velocity, higher degree of accuracy, and greater mobility. Arrowheads also required substantially less raw materials than spear heads. A flint knapper could produce a large number of small projectile points from a single piece of chert. Even with the gun's many advantages in the historic era, bows and arrows are much quieter than guns, allowing the hunter more chances to strike at the prey.

Equipment

- Bow and Arrow

America Bow
America Arrow

MEDIUM Elk horn, thread, horsehair, Stroud cloth, sinew, metal, pigment, buffalo hide, mallard scalps, remnants of feathers

• Place Collected: Fort Snelling, Minnesota, United States

DATES early 19th century
DIMENSIONS bow: 4 1/2 x 1 1/2 x 44 in. (11.4 x 3.8 x 111.8 cm) quiver and bow case: 5 3/4 x 41 in. (14.6 x 104.1 cm)  (show scale)
COLLECTIONS Arts of the Americas
MUSEUM LOCATION This item is not on view
EXHIBITIONS

• Tipi: Heritage of the Great Plains

ACCESSION NUMBER 50.67.27a-b
CREDIT LINE Henry L. Batterman Fund and Frank Sherman Benson Fund
RIGHTS STATEMENT Creative Commons-BY
CAPTION Probably Yankton, Nakota, Sioux (Native American). Bow, Bow Case, Arrows and Quiver, early 19th century. Elk horn, thread, horsehair, Stroud cloth, sinew, metal, pigment, buffalo hide, mallard scalps, remnants of feathers, bow: 4 1/2 x 1 1/2 x 44 in. (11.4 x 3.8 x 111.8 cm). Brooklyn Museum, Henry L. Batterman Fund and Frank Sherman Benson Fund, 50.67.27a-b. Creative Commons-BY (Photo: Brooklyn Museum, 50.67.27a-b_PS2.jpg) IMAGE overall, 50.67.27a-b_PS2.jpg. Brooklyn Museum photograph, 2009

CATALOGUE DESCRIPTION The object is a bow, a bow case, arrows and a quiver. Bow is inlaid with elk antler and decorated with bands of mallard duck neck skin. There is red dyed horsehair tufts at each end. Duck skin is used because for the Sioux the duck appears in all three levels of the world - sky, water and earth. The buffalo hide bow and quiver case has red and black pigment mixed with glue. Even lines of glue are used to create lines around the black triangles. The bow has an elaborate design on the surface created by inlaid sections of elk horn. On either side of the inlaid area is a red painted band, at the ends of which are mallard scalp feathers that have almost disappeared. The bow is backed with white-painted thread. Attached to each end of the bow are red horsehair ornaments. Also attached is a strip of red stroud cloth fastened around the handgrip.

The bow case and quiver are made of buffalo hide and have sparsely painted designs. There are five configured designs: two on each side of the bow case and one on the quiver. The designs are made up of elongated diamond shapes divided in half with a small linking section between each repeated triangular part. All parts of the design are delineated with thin impressed lines. The triangles are filled in alternately with dark brown and red color. The small linking section is brown. The intensity of the colors is pale, perhaps from an application of sizing. From the bottom of the bow case hang hide tabs, with pierced decorations.

- Bow

America Bow

Indians used arrows to kill animals as large as bison and elk. Hunters approached their prey on foot or on horse back, accurately targeting vulnerable areas. The choice of materials and the design of arrows and the bow were not random. Some materials were generally more readily available than others. Environmental conditions also affected the choice of materials. Humidity affects wooden bows, and temperature affects horn and antler. The intended use of the system, on foot or horse back, for instance, affects the final design. Bows used while mounted on horseback tend to be shorter than the bows used when on foot. Since the length of the bow determines the stress placed on the bow when drawn, shorter bows tend to be made of composite materials while bows used when on foot can be made of wood. Indians used a variety of materials to make the bow stave, relying on materials that met certain requirements, most important of which is flexibility without breaking. Several species of plants and some animal materials met these requirements. Ash, hickory, locust, Osage orange, cedar, juniper, oak, walnut, birch, choke cherry, serviceberry, and mulberry woods were used. Elk antler, mountain sheep horn, bison horn, and ribs, and caribou antler also were used where available. Bow construction techniques included a single stave of wood (self bow), wood with sinew reinforcement (backed bow), and a combination of horn or antler with sinew backing (composite bow). Hide glue was used to attach the backing. Bow strings most frequently were made of sinew (animal back or leg tendon), rawhide, or gut.

- String

America String

The Dakota Indians also used cord made from the neck of snapping turtles. Occasionally, plant fibers, such as inner bark of basswood, slippery elm or cherry trees, and yucca were used. Nettles, milkweed, and dogbane are also suitable fibers. Well-made plant fiber string is superior to string made of animal fibers because it holds the most weight while resisting stretching and remaining strong in damp conditions. However, plant fiber strings are generally much more labor intensive to make than animal fiber strings, and the preference in the recent past was for sinew, gut, or rawhide.

- Arrow Shafts

Arrow shafts were made out of shoots, such as dogwood, wild rose, ash, birch, chokecherry, and black locust. Reeds from common reed grass were also used with some frequency throughout North America with the exception of the Plains where reeds did not grow. Shoots were shaved, sanded, or heat and pressure straightened. Tools made of bone or sandstone were used to straighten the shaft wood. Because they are hollow and light, reed-shaft arrows typically have a wooden foreshaft and sometimes a wooden plug for the nock end of the arrow. If a foreshaft was used, it could be glued to the main shaft, tied with sinew, or fit closely enough to not need glue or sinew. Prehistoric points or heads were made of stone, antler, or bone. Thin metal, bottle glass, and flint ballast stones also were used to make points in the historic period.

- Points and Fletching

Points and Fletching

Points were attached to the arrow shaft with a variety of methods. Most frequently, the arrow shaft would have a slit cut into the end to accept the point. Sinew would then be wrapped around the shaft to pinch the slit closed. Points could also be hafted directly by wrapping sinew around the point and the arrow shaft. Metal points generally were attached using the same techniques and only infrequently attached by means of a socket.

Indians made many types of arrowheads. In addition to the traditional triangular stone arrowhead, carved wood or leather points have large, broad surfaces. Different types of arrow tips were used for different purposes, such as for large game versus small game. Small triangular stone points are not bird points: large, blunt-tipped wooden points were used for birds. Harpoon-like points also exist and were used in fishing.

Fletching of bird feathers was sewn to or inserted in the shaft. Feathers of wild turkey were preferred but many other birds, including eagle, crow, goose, hawk, and turkey, were often used. Sinew was generally used to attach the fletching by first stripping some of the feathers from the front and back of the vane and then tying the vane to the shaft in front of and behind the remaining feathers. Sometimes plant twine was used to sew through the quill. Hide glue was used with or instead of sinew ties. Animal products like sinew have the advantage of tightening as they dry.

The fletching balances the weight of the arrowhead to prevent the arrow from tumbling end-over-end in flight. When fletched properly, an arrow may spin in flight producing an ideal trajectory. A similar effectiveness is gained by placing grooves in the barrel of a rifle to cause the bullet to spin. In fact, until the invention of rifled guns, bows generally proved to be more accurate and could shoot arrows further than powder-thrown missiles.

Archery Style

Archery Style

The bow acts as a pair of springs connected by the grip or handle. As the string is pulled the material on the inside or belly of the bow limbs compresses, while the outside or back is stretched and is placed under tension. This action stores the energy used to draw the string back. When the string is released, the limbs quickly return to their state of rest and release the energy stored by drawing the string. Therefore, the power of a bow is measured in terms of draw weight.

The height and strength of the archer determines the ideal draw weight of the bow. A combination of the length of draw and the draw weight of the bow determines the cast (propelling force) of the bow. Adjusting either or both of these features allows the arrowhead to be made larger or smaller as needed. The draw weight of the bow also determines the ideal weight and diameter of the arrow shaft. Even a bow with a high draw weight can only throw an arrow so far. If the arrow is too heavy, it will not fly far or fast enough to be very useful. A shaft that is too thick or too thin will also lead to problems. It must compress enough to bend around the bow stave as it is launched by the string. If it does not bend, the arrow flies to the side of the target. If it bends too much, it will wobble (reducing the striking force) or even shatter.

The length of the draw, also determined by the body of the archer, determines the length of the arrow. The maximum cast of the bow determines the maximum weight of the point. This is how we know that certain “arrowheads” can not really have been used on an arrow, at least not to any good effect. A general rule of thumb is that a stone arrowhead will be less than 1 1/2-x-3/4-inch in dimensions and will generally weigh less than one ounce. Larger “arrowheads” probably would have been spear, dart, or knife tips.